Lamp Dual.8
One lamp for long time
Compatible with:
Be aware that:
Dual.8 gives you 6 times more light than stock light, but on high beam needs 90 instead of 35 Watt. We supply 2 additional cables that must be connected directly to the battery (easy 15 min job), so bikes original harness will not be overloaded. Your bike produces between 168W (exc-f 250) and 195W (exc-f 500), this is plenty of power unless, while hard enduring you get stuck in a muddy river, you must start the engine over and over, your cooling fan is running and our lamp is going on full power. Then if you don't have a kickstarter, you might be unable to start the bike.
So to be save power You can:
-Run the lamp on low beam (then it uses similar amount of energy as stock lamp on its either low or hi beam)
-Turn the lamp using our kill switch
-Get a kickstarter
Be aware that:
Dual.8 gives you 6 times more light than stock light, but on high beam needs 70 instead of 35 Watt. We supply 2 additional cables that must be connected directly to the battery (easy 15 min job), so bikes original harness will not be overloaded. Your bike produces between 168W (exc-f 250) and 195W (exc-f 500), this is plenty of power unless, while hard enduring you get stuck in a muddy river, you must start the engine over and over, your cooling fan is running and our lamp is going on full power. Then if you don't have a kickstarter, you might be unable to start the bike.
So to be save power You can:
-Run the lamp on low beam (then it uses the same amount of energy as stock lamp on its either low or hi beam)
-Turn the lamp using our kill switch
-Get a kickstarter
How it works:
Lamp has two modes of operation:
Low Beam: 44W / High Beam: 88W | |
94% | |
Overheat protection Reverse polarisation protection Voltage variation compensation | |
IP67 | |
-40 - 65°C | |
~830g |